Ultrasonic Water Meter (model DJWM85 or SextoTM)
If you are looking for a high tech alternative for conventional metering then our DJWM85 or SextoTM meter is a very good choice. This meter is an Ultrasonic Water Meter without integrated valve but with all benefits of ultrasonic metering with latest technology. AMR or Automatic Meter Reading is possible via several ways i.e. LoRa, LoRaWAN, GPRS and NB-IoT. Of course this meter also has an optical port which you can use for reading out metering data.
Prepaid Water Meter Domestic or Residential (model DJWM84 or QuintoTM)
TagMeter Systems fully adopted the Ultrasonic Metering concept. Using Ultrasonic Sensors we measure the flow through a brass tube. The meter is fully digital and there are no moving parts. Also Air in the tubes or pipelines is not measured. The Prepaid Ultrasonic Water Meter for Residentials we called DJWM84 or QuintoTM which means "Fifth" translated into English language.
Ultrasonic Bulk Water Meter (model DJWM68 or CuartoTM)
If you are looking for a high tech alternative for Bulk Metering Utility, Industry, Waterworks or Agriculture then you should consider our ultrasonic bulk meter DJWM68 or CuartoTM. We called this model DJWM68 or CuartoTM which means "Fourth" translated in English language.This meter comes in the range of DN50 .. DN300 with Flange connection. AMR or Automatic Meter Reading is possible via several ways i.e. LoRa, LoRaWAN, GPRS, NB-IoT and Sigfox. This meter is also equipped with an optical communication port which you can use for reading out metering data.
Communal Standpipe Meter
A Communal Standpipe Meter usually is installed in areas where a household or residential connection of a water meter is not possible. Several households make use of the same water dispenser and distributes water in a container. Each user or houshold of the Communal Standpipe Meter has a Tag (RF-ID) or Token operating as a water wallet.
The Tag/Token not only is used as water wallet, it also is used to get data from the meter into the management system: each time water is fetched the meter writes back metering data onto the Tag which is read into the management system each time new water credits are purchased.
Solar Powered Water Access Point
TagMeter Systems developed a fully solar powered Water Access Point. From a borehole water is pumped up into a water tank and using gravitation the stored water is distributed into containers in batches of 25 litres by default. Water Credits are stored on RFID Tags/Tokens. The Tag is updated with meter readings and meter status every time it is inserted into the central unit interface.
