TagMeter Systems

  • Vergroot lettergrootte
  • Standaard lettergrootte
  • Verklein lettergrootte
Home Water Meters

Yard Meters

Yard Meter Aluminium

Yard Meter AluminiumThe TagMeter Yard Meter (YMMI) is an above ground water dispensor. This highly effective meter system is made of extruded anodized aluminium panels with a casted and powder coated aluminium top part which holds the electronics.

We did choose for aluminium with a special purpose. Benefits of using a material like aluminium is:
Lightweight: Aluminum weighs less by volume than most other metals. In fact, it is about one-third the weight of iron, steel, copper, or brass. This makes it easier to handle and less expensive to ship.
Strong: Aluminum profiles can be made as strong as needed for most applications. Cold-weather applications are particularly well-served by aluminum because, as temperatures fall, aluminum actually becomes stronger.
Non-corrosive: Aluminum does not rust. It’s protected by its own naturally occurring oxide film, a protection that can be further enhanced by anodizing or other finishing techniques.
Resilient: Aluminum combines strength with flexibility and can flex under loads or spring back from the shock of impact.
An advantage of using this material is that these panels are not sensitive for corrosion (do not rust). Further the construction is very sturdy and long lasting. There is no degeneration of the material by sunlight or UV-radiation.

Yard Meter Aluminium




The Top part or Cap which holds the electronics has a mechanism which protects the 2 line LCD Dot Matrix display from direct sunlight and UV radiation.


Inside the aluminium panels we have the following:

  • Flowmeter and valve are combined in one body made of a special technical plastic which grows and shrinks with temperature changes so in freezing conditions the body will not burst. Also the material is non-stick so particles in the water can not block the turbine
  • Manual ball valve
  • External easy to clean strainer
  • Connection to water network: either easy snap-fit or threaded connection 1G


Yard Meter Aluminium




Available options:

1. Deaerator: removed air from the incomming pipeline

2. Mini Hydro Generator: a unique small scale hydro generator which powers all electronics when water is flowing through the meter and shutting down the power supply of the battery pack, resulting in a much longger life time of the battery pack


 

 

 


GENERAL INFO
● Extruded Anodized Aluminium Profiles: extremely strong, does not rust, very durable
● Top part with the electronics is made of Casted and Powder Coated Aluminium
● One LCD Display, 2 lines. Display protected against UV radiation
● ≥ 100 pulses per liter resolution
● Compact body: Meter and Valve are integrated and adapts to temperature changes
● Body is made of a technical plastics: Size adapts to the ambient temperature to
prevent burst in freezing conditions
● Particles do not stick to the body and can not block the Multijet Turbine
● Controlled by Contactless Passive R.F. Transponder Tags
● Zoning, Emergency Credits
● Manual ball valve
● Easy to clean external strainer
● IP67

OPTIONS
● Hydro Generator: power the electronics using the water flow
● Deaerator: remove air from pipelines
● AMR/AMM using GSM/GPRS/SMS module
● Split Metering: Remote display/controller unit inside the house
using a cable connection or our wireless Radio Frequency module

PERFORMANCE DATA
Nominal Flow Q3 (m³/h): 1.5
Maximum Flow Q4 (m³/h): 3.0
Transitional Flow Q2 (m³/h)
0.12
Minimum Flow Q1 (m³/h): 0.03
Pressure Class: MAP10
Pressure Loss Meter ΔP: ≤ 0.63
Pressure Loss Meter + Valve ΔP ≤ 1.0
Temperature Class: T30
Metrological Class: B
Pressure Loss (bar) 0.6
Maximum Registry Capacity (m3) 99999
Smallest Reading resolution (m3) 0.00005
Unit Weight ± 7.0
DIMENSIONS
Height 460 mm
Width 175 mm
Dept 175 mm



 

Ultrasonic Water Meters

NEW: TagMeter Ultrasonic Water Meters

If you want a really reliable meter which does not measure air, has no moving parts and not sensitive for grid and/or other particles than you need our new and affordable ultrasonic water meter.

Ultrasonic Water Meter

Ultrasonic Water Meter

Ultrasonic Water Meter

  • Does not measure air and grid and can not block unlike volumetric, piston and/or turbine meters;
  • IP68 sealed;
  • No moving parts at all;
  • OIML R049;
  • Batterylife: 10 years minimum
  • Both Water and Ambient Temperature maximum 85 °C;
  • DN15 (Q3=2.5m³/h), DN20(Q3=4.0m³/h), DN25(Q3=6.3m³/h), DN40(Q3=16.0m³/h) and DN50(Q3=25m³/h);
  • Headloss extremely low;
  • Principle used: Ultrasonic Transit Time with 1000 samples per second;
  • Affordable pricing!

Options:

  • Prepaid Conversion set including self-cleaning valve, TagMeter Prepaid Electronics unit and TagMeter RF-ID Transponders for Customers (UserTags) and Service (ServiceTags);
  • Inductive Pad;
  • Remote display and Remote Controller (RF-Based);
  • AMR/AMM (Automatic Meter Reading and Automatic Meter Management).


Download leaflet: here

Request More information: here

Or.. Call TagMeter Systems at +31(0)165553360. You can also send mail to TagMeter Information Department: Dit e-mailadres is beschermd tegen spambots. U heeft Javascript nodig om het te kunnen zien.